Cameo PIXBAR G2 SMD Manual De Usuario página 20

=
=
=
20
Pair with W-DMX devices. W-DMX must be
enabled on all devices, and the pairing with a
transmitter be retained (Receive Reset).
Send incoming signal to XLR connector
Using the incoming signal from the XLR con-
nector when the W-DMX signal is lost.
No connection between W-DMX signal and
XLR connectors
Display is rotated by 180° (e.g. for overhead
installation)
No display rotation
Display lighting permanently on
Deactivation of the display lighting after
approx. 20 seconds of inactivity
Function disabled
The controls and display are locked after
approx. 60 seconds without any operation.
Unlock: Press UP and DOWN simultaneously
for approx. 5 seconds
Dimmer curve: The light intensity increases
linearly with the DMX value
Dimmer curve: The light intensity can be ad-
justed finely in the lower DMX value range and
coarsely in the upper DMX value range
Dimmer curve: The light intensity can be ad-
justed coarsely in the lower DMX value range
and finely in the upper DMX value range
Light intensity can be finely adjusted at lower
and higher DMX values and broadly adjusted
at medium DMX values
Select LED PWM frequency
Light responds abruptly to changes in DMX
value
Light behaves like a halogen spotlight with
smooth brightness changes