Cameo PIXBAR G2 SMD Manual De Usuario página 27

FROST FILTER
A standard frost filter is included in the packaging content of the PIXBAR
filter into the provided holder (1) of the bar, open the sliding latch at one end of the bar (2, slide
down the handle). After inserting the frost filter into the holder, close the latch again to prevent the
filter from falling out.
GLARE SHIELD
A glare shield is included in the packaging content of the PIXBAR
BAR G2 there are three threads on the top edge of the housing (1). Mount the glare shield on the
®
desired side of the PIXBAR
1
2
G2 using the three knurled screws (2).
®
2
1
G2. To insert the frost
®
G2. On both sides of the PIX-
®
27