B
Product usage
Note:
•
If required you may lay the refrigerator on its back in order to gain access
to the base, you should rest it on soft foam packaging or similar material to
avoid damaging the backboard of the refrigerator.
•
There is no need to install these accessories under normal usage. Only under
the extreme circumstances, that is opening the door about 90 degree, this
refrigerator may take risk of tipping. Then rubber supporting pad should be
fastened to the lower base cover to steady this appliance.
1.
Tilt appliance to find screw hole on the left of lower base cover.
2.
Put screw into the hole of rubber supporting pad.
screw hole
screw
rubber supporting pad
34
EN