Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Caution!
When you set a temperature, you set an average temperature for the whole
refrigerator cabinet. Temperatures inside each compartment may vary from the
temperatures displayed on the panel, depending on how much food you store
and where you place it. High or low room temperature may also affect the actual
temperature inside the appliance.
1.
POWER
Press and hold the
the standby mode, the
will be extinguished, and other key functions will be invalid, until the original control state
will be restored after pressing the button again to exit the standby mode.
2.
Freezer/Fridge conversion
Press and hold
button for 3 seconds to convert between freezer compartment and fridge
compartment. After that, the light will go out first, and then turn on or flash once, which is a
normal phenomenon that the control system has realized switching.
Caution!
•
Before changing the compartment setting, make sure that the stored food is
suitable for new setting mode. If not, please empty it first.
•
When the freezer mode is changed to fridge mode, please open the door for
5 minutes before putting in the food that needs to be refrigerated.
•
When the fridge mode is changed to freezer mode, please close the door and
run for 200 minutes before putting in the food that needs to be frozen.
•
When the fridge mode is changed to freezer mode, ensure there are no bottled
or canned drinks (especially carbonated drinks) in the freezer compartment.
Bottles and cans may explode.
3.
TEMP.
Press the
button to adjust the temperature to the desired setting.
If you have set the Freezer compartment type to Fahrenheit, the temperature will be set in
the following sequence.
If you have set the Freezer compartment type to Celsius, the temperature will be set in the
following sequence.
button at least 3 seconds to enter/exit standby mode. After entering
icon will light up, the temperature area will display «OF», other icons
41
EN
Publicidad
