Descargar Imprimir esta página

VALBERG UF NF 384 E X180C Instrucciones De Uso página 51

Publicidad

Idiomas disponibles

Idiomas disponibles

C
Cleaning and maintenance
• Spray water onto a cleaning cloth instead of spraying directly
on the surface of the appliance. This helps ensure an even
distribution of moisture to the surface.
• Clean the doors, handles and cabinet surfaces with a mild
detergent and then wipe dry with a soft cloth.
Caution!
• Don't use sharp objects to clean with, as they are likely
to scratch the surface.
• Don't use Thinner, Car detergent, bleach, your freezer
as described above.
Warning!
Do not use sharp objects to remove frost from the freezer
compartment. Only after the interior is completely dry
should the appliance be switched back on and plugged
back into the main socket.
Door seals cleaning
Take care to keep door seals clean. Sticky food and drinks can
cause seals to stick to the cabinet and tear when you open the
door. Wash seal with a mild detergent and warm water. Rinse and
dry it thoroughly after cleaning.
Caution! Only after the door seals are completely dry
should the appliance be powered on.
Replacing the LED light
• This product contains a light source of energy efficiency class G.
• Light source in this product can only be replaced by qualified
professionals.
• Please contact after-sales service if the light source fails.
• The light source shall be removed at the end of the product's
useful life, with sorting and recycling done separately.
49
EN

Publicidad

loading

Este manual también es adecuado para:

980050