Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
3.
Make screw in alignment with the hole on lower base cover. Fasten rubber supporting
pad to the base cover firmly by a cross screwdriver (self-provided).
cross screwdriver
Reversing the door
The side at which the door opens can be changed, from the right side (as supplied) to the left
side, if the installation site requires.
Warning! When reversing the door, the appliance must not be connected to the mains. Ensure
that the plug is removed from the mains socket.
Tools you will need:
8mm socket wrench
Not provided
Thin-blade screwdriver
35
EN
Putty knife
Publicidad
