Publicidad
Idiomas disponibles
Idiomas disponibles
2.1.2 Suspended installation 1:1 of the hoist
bottom of hook. The pawl of safety of the hook
must close completely.
Make sure that the length of soft strand exiting the
winch does not exceed 120m (risk of deformation
of the exit guide); for example, use a cable reel.
If a pain appears in the articulation of the device
with the hook fastener member, it is necessary to
interpose a sling of appropriate capacity.
Installation can also be done with the winch moving
on the cable; watch for movement of the power
INSTRUCTION MANUAL
Electrical winches MOTRIX types 526&527
It's
the
simplest
mounting and the
most
common.
Device in suspension
and direct traction or
lifting.
The
anchoring
of
the
device must be done
exclusively by its
hook and never by
its handle.
The hook of the
machine
must
be
placed in the body of
the attachment point,
so that this body is at
cable. The use of a push button box extension or
radio control may be necessary.
Check
each
capabilities to ensure your safety.
2.1.3 Installation with deflection 1:1 or reeving
2:1
With hoists Motrix 750/1000/1500 (526J 527D
527N 527E) :
With hoist Motrix 1000 (527E 527N) and the kit
030054 :
Ref: 1813000210
Page: 8/21
Version: 42/22
element
of
connection
Publicidad
