Technical Maintenance - Kemper MaxiFil Clean Manual De Uso

KEMPER MaxiFil Clean Instruction manual - EN

7 Technical maintenance

The guidelines described in this chapter comply with the minimum requirements.
Depending on the operating conditions, the MaxiFil Clean device may be subject to
further instructions to keep the instrument in optimal condition. The mentioned time
intervals apply to single-shift mode of operation.
Maintenance and repair works described in this chapter may only be carried out by
the operator's specially trained service personnel.
Spare parts used shall comply with the technical requirements specified by
KEMPER GmbH. In principal, this is guaranteed by using genuine spare parts.
Ensure the safe and environmentally friendly disposal of operating substances and
replacement parts.
Follow the safety instructions on the following pages.
- 60 –
Technical changes and errors reserved.