Wacker Neuson GPS9700A Manual Del Operador página 21

GPS9700A
2.2 Label Meanings
a
GFCI TEST INSTRUCTIONSTEST—BEFORE EACH USE
Normal operating state - sensing device green LED is ON and circuit breaker is at ON position.
1: Press TEST button. Green LED should go OUT, red LED should come ON, and circuit breaker
should trigger to OFF position.
2: If sensing device LED or breaker does not trip or change state, DO NOT USE. Consult an
electrician for assistance.
3: Press RESET button. Red LED should turn OFF and green LED should turn ON.
4: Manually reset (switch) circuit breaker to ON position to restore circuit power.
b
c
—
—
—
wc_si001096en.fm
WARNING
Test GFCI before use. See label above.
Start/Shutdown
Open main circuit breaker.
Open the fuel flow valve.
Close the choke.
21
Labels