Wacker Neuson GPS9700A Manual Del Operador página 40

Maintenance
5 Maintenance
5.1 Maintaining the Emission Control System
For machines sold in North America:
Normal maintenance, replacement, or repair of emission control devices and
systems may be performed by any repair establishment or individual; however,
warranty repairs must be performed by a dealer/service center authorized by
Wacker Neuson. The use of service parts that are not equivalent in performance
and durability to authorized parts may impair the effectiveness of the emission
control system and may have a bearing on the outcome of a warranty claim.
5.2 Periodic Maintenance Schedule
The table below lists basic machine maintenance. Tasks designated with check
marks
points  require special training and equipment.
Check fuel level.
Check engine oil level.
Inspect fuel lines.
Inspect air filter. Clean as needed.*
Check external hardware.
Change engine oil.*
Check shockmounts. Replace as needed.
Check and clean spark plug.
Check fuel filter.
Replace oil filter.*
Replace spark plug.
Check and adjust valve clearances.*
Replace fuel filter.*
Replace air cleaner (paper element only).*
Check fuel line. Replace as needed.
5.3 Engine Oil Viscosity

may be performed by the operator. Tasks designated with square bullet
* Service more frequently in dusty conditions
First
Daily
month 6 months
before
or
starting
20 hrs







40
GPS9700A
Every Every
year
or or
100 hrs 300 hrs








wc_tx004602en.fm
Every
2 years
or
500 hrs

