Publicidad
Idiomas disponibles
Idiomas disponibles
change to high-beam mode, and so on. To turn off the lights, hold the
button down for 2 seconds. The front light is below the battery and the
two rear lights, on either side of the stand frame.
4.7. USING THE HANDBIKE BATEC QUAD HIBRID 2 CONTROLS
There are two operating modes: Assisted manual propulsion and elec-
tric mode. In the first mode, the user propels the handbike using the
crank arms and the motor provides assistance. The second mode is an
emergency mode, only for situations when the user needs to use the
handbike without mechanical traction using the MAGIC LEVER.
ASSISTED MANUAL PROPULSION
In Assisted manual propulsion mode, there are 3 levels of help (po-
sition 1, position 2 and position 3), each with a light indicator on the
display panel. Level 1 provides the least help and level 3, the most.
Users can change between the three levels using the buttons on the
right handle. When the HANDBIKE BATEC HIBRID is switched on, it will
always be in assisted manual propulsion mode, position 1. The button
with the up arrow increases the level and the button with the down
arrow is to switch to a lower level.
There is also a 8-speed gear train and gears can be selected using the
levers on the right grip.
Using Assisted manual propulsion mode
Hold the grip firmly and turn the Batec crank arms forward, always
with the cables up. When the sensor in the axis of the pedals de-
tects the force, it will activate the electric motor. Use the buttons to
change the level of assistance and use BATEC SHIFT LEVER.
– 24 –
(See fig. 23, 24)
MAGIC LEVER
Normal use
1. Put the MAGIC LEVER in position - B.
2. Push the pedal forwards.
(See fig. 45)
If you can't start the handbike, use the COMBINED START
1. Hold the MAGIC LEVER in position - C.
2. Push the pedal 1/16 of a turn forwards.
3. Release the MAGIC LEVER.
(See fig. 48)
4. Push the pedal forwards.
Using No resistance mode
1. Put the MAGIC LEVER in position - A.
2. Push the pedal forwards.
(See fig. 50)
ELECTRIC PROPULSION MODE
To switch to electric mode, press the down arrow while in position 1.
In electric mode, there is only one speed and one light indicator on
the display panel.
Using Electric propulsion mode
The user controls the rotational speed of the motor by freely turning
the pedals, in the forward direction, using the MAGIC LEVER.
BACK PEDAL BRAKE ON THE HANDBIKE BATEC HIBRID QUAD
• How it works: Turn the pedals backwards to brake.
– 25 –
(See fig. 44)
(See fig. 46)
(See fig. 47)
(See fig. 49)
(See fig. 51)
Publicidad
