VEVOR APD30 Manual De Instrucciones página 6

3.2 Functional test
After having plugged the feeding cable in the electric net , the machine is
ready for the functional test. To start:press the green button , the machine
starts working. To stop:press the red button , the machine will stop
working.Start the machine without loading , let it run for one minute and
make sure it is functioning perfectly.
3.3 Before every work-cycle , always make sure the machine is perfectly
clean , in particular those surfaces that get in touch with the dough. If
necessary clean the machine.
Warning:Take sundries and hands away from the rollers before turn on the
machine!
3.4 Operation for the shaping of round disks
3.4. 1 After turning on the machine , you can put the small dough(20-500g)
which have ferment previously (at least 4 to 6 hours) , squash the sides
slightly and put some dry flouron it so it can easily go through the upper
rollers. (Pict.1)
3.4.2 When the dough comes out from the upper roller , you will see thin
dough,with an oval
shape.You can turn the dough to 90°place by hand rapidly , and ready for
the next trial to through the lowest rollers.Out of these rollers it will have a
disk shape , this shape is not perfect so it needs the finishing touches by
hand. Pict.2
3.5 Usage for the shaping of rectangles , squares , and others.
The methods are the same as the point 2.4 . If you want to obtain different
shaping dough , you can cut the dough to the approximate shape , for
- 5 -