Mi-T-M Corporation MH-0080-CM11 Manual Del Usuario página 14

Important: Be sure to position the regulator so that the regulator is horizontal, also as shown .
2. To connect to heater inlet, rotate clockwise and tighten firmly with a wrench.
3. Check all connections for leaks, using a 50/50 solution of dishsoap and water. Bubbles at the connections
show a leak. Correct all leaks before lighting heater. NEVER USE AN OPEN FLAME TO CHECK FOR LEAKS.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR WHILE CONNECTED TO A FUEL
SOURCE.
14
ASSEMBLY
Propane Convection Heater Manual