Forno FBOEL1371-30 Manual De Instrucciones página 17

Installation Instruction (continued)
STEP 4: Make electrical connection
WARNING
Electrical Shock Hazard
Grounding through the neutral conductor is prohibited for new branch-circuit installations (1996 NEC); mobile homes;
and recreational vehicles, or in an area where local codes prohibit grounding through the neutral conductor. For instal-
lations where grounding through the neutral conductor is prohibited, see the Ungrounded Neutral graphic.
Use grounding terminal or lead to ground unit.
Connect neutral terminal or lead to branch circuit neutral in usual manner.
Failure to do so could result in death, fire or electric shock.
3-WIRE CABLE FROM HOME POWER SUPPLY
Connect to the House Electrical Supply
IMPORTANT: Use the 3-wire cable from home power supply where local codes permit a 3-wire connection.
A
B
C
D
1. Disconnect power.
2. Connect the 2 black wires together using a UL listed wire connector.
3. Connect the neutral (white) wire and the ground (green or bare) wire (of the range cable) using a UL listed wire con-
nector.
4. Connect the 2 red wires
5. Install junction box cover.
4-WIRE CABLE FROM HOME POWER SUPPLY
Connect To The House Electrical Supply - U.s.a. Only
IMPORTANT: Use the 4-wire cable from home power supply in the U.S. where local codes do not allow grounding
through neutral, new branch circuit installations (l99e NEC), mobile homes and recreational vehicles, new construction
and in Canada.
Grounded Neutral
I
F
E
together using a UL listed wire connector.
Junction Box
A
Black Wires
B
Neutral (White)Wires
C
Ground (Green or Bare) wire
D
Cable from Oven
E
H
UL Listed Conduit Connector
F
Red Wires
G
G
UL Listed Wire Connectors
H
House Electrical Supply
I
17