Publicidad
Machine Operation
EN
Emergency Stop Button/ Horn
n an emergency, strike the emergency
I
stop to disable the machine.
Note: After the Emergency Stop button has been pressed the Traction LED will flash 7 times, pause and repeat until the
Emergency Stop button has been reset and the machine switched off / on.
Maximum Speed Control
Set desired traction speed as required, depending on floor type
and level of soiling.
Once the Max speed has been set using the control knob on the
control panel,
fine adjustments can be made using the variable control speed
pedal located on the right side of the footplate.
!
Care must be taken to reduce speed when cornering or manoeuvring.
Anti-tip System
The CRL 8055/8072 is equipped with an
Anti-tip system.
The machine automatically slows down
preventing the machine from tipping over if
cornering at speed.
The buffers at the front are designed to
prevent the machine tipping in the event of
the operator turning sharply.
The buffers are designed to be
replaceable when worn.
Horn button - for sounding a warning
46
signal
!
Publicidad
