Klarstein ESPRESSIONATA EVO Manual De Instrucciones página 32

EN
32
Preheat the espresso machine
1. Plug the power cord into the power outlet and press the "On/Off" button.
When the red on/off indicator light is on and the coffee indicator light is
flashing, the espresso machine will start preheating. When the thermometer
shows between 80 and 120 ℃ (position of the coffee symbol) and the coffee
indicator light is on, the preheating process is complete. If you want to switch
off the espresso machine, press the "On/Off" button again.
2. Place the filter screen in the portafilter, insert the portafilter into the espresso
machine in the "insert" position, and then turn it clockwise to the "locked"
position.
3. Place the coffee cup under the filter and press the "one cup" button (3) to
preheat the espresso machine and coffee cup with hot water.
Preparation of an Italian espresso coffee
1. Fill the filter with ground coffee, smooth it out and press the ground coffee
firmly into the filter.
2. Place the filter in the portafilter, insert the portafilter into the espresso
machine in the "insert" position, and then turn it clockwise to the "locked"
position.
3. Place the coffee cup under the portafilter when the coffee indicator light stops
flashing, then press the one-cup button (3) or the two-cup button (8) to brew
the coffee.
4. The device will stop automatically when one or two cups have been prepared.
Note: Do not leave the espresso machine unattended while it is in use.
• After brewing coffee, allow the espresso machine to cool for 5 minutes. Turn
the portafilter to the left and remove it.
• When completely cool, wash the portafilter and filter screen with fresh water
and clean the body and drip tray with a damp cloth.