HOLZMANN MASCHINEN FKS400V32PRO 400V Instrucciones De Servicio página 44

12.7 Hazard warnings
Residual risks
Despite intended use, certain residual risk factors remain.
Risk of injury to fingers and hands from rotating saw blade if the workpiece is not guided
•
properly.
Risk of injury from the workpiece being flung away if not properly held or guided, such as
•
working without a fence. Risk of kickback!
Danger to health from wood dust or wood chips. It is essential to wear personal protective
•
equipment such as eye protection and a dust mask and to use a dust collection system.
Risk of injury from breakage or ejection of the saw blade or parts of it, especially in the
•
event of overloading or incorrect direction of rotation.
Risk of injury to the eye from flying parts, even with protective goggles.
•
• Hearing damage if hearing protection is not used.
Injuries caused by a defective saw blade.
•
Risk of electric shock, if improper electrical connections are used.
•
Hazardous situations
Due to the structure and construction of the machine, hazardous situations may occur which are
identified in these operating instructions as follows:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
A safety instruction designed in this way indicates a possibly hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Regardless of all safety regulations, your common sense and your appropriate technical
aptitude/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends on you!
TRANSPORT
Transport the machine in its packaging to the installation site. To manoeuvre the machine in its
packaging, e.g. a crane, pallet truck or forklift with appropriate lifting capacity and a fork length of
at least 1200 mm can be used. The specifications can be found in the chapter Technical data. For
HOLZMANN Maschinen GmbH
D AN G E R
WAR N I N G
C AU TI O N
www.holzmann-maschinen.at
N O TE
TRANSPORT
44
FKS400V32PRO_400V