Publicidad
Idiomas disponibles
Idiomas disponibles
Angled cuts with inclined saw blade
Symbolpicture
Longitudinal cut of boards
Use the down holder for cutting and fixing boards and avoiding a kickback.
15.3
Operating
Start
Select language
HOLZMANN Maschinen GmbH
NOTE:
mitre gauge must be extended.
-
Fix the workpiece with the downholder.
-
Use the sliding table to move the workpiece evenly.
-
Adjust the desired inclination of the saw blade (13).
-
Adjust the saw blade guard (14).
-
Adjust the rip fence (15) or the cross-cut fence (16).
-
Fix the workpiece with the downholder (17).
-
Mount the down holder (1) in the groove of the sliding
table.
-
Set the desired dimension with the rip fence or the
cross-cut fence.
www.holzmann-maschinen.at
If the workpiece extends more than 1340 mm, the
-
Switch on the main switch (1)
-
On the display the homescreen appears (2)
-
Selectable languages (3) are shown
NOTE:
Languages can be selected in parameter
settings later
-
After boot the main menu appears
-
Machine is ready for operation
-
Push key (1)
-
Enter password (1111) in key (2)
-
Push key (3) until the desired language is
displayed
-
Push key (4) to return to the previous page
OPERATION
56
FKS400V32PRO_400V
Publicidad
