Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
Danger due to electrical voltage!
Handling the machine with connected power supply may result in serious injury or
death.
Always disconnect the machine from the power supply before cleaning,
maintenance or repair work and secure it against unintentional reconnection.
Wear protective cutting gloves when handling the saw blade and scoring
blade to reduce the risk of injury!!
16.1
Cleaning
Regular cleaning guarantees the long service life of your machine and is a prerequisite for its safe
operation.
Incorrect cleaning products can attack the finish of the machine. Do not use any
solvents, nitro thinners or other cleaning products that could damage the machine's
finish.
Observe the specifications and instructions of the cleaning agent manufacturer.
After each work shift, clean the machine and all its parts thoroughly.
•
•
Vacuum the wood chips and sawdust. Wipe off any remaining dust with a dry cloth.
Use a resin-dissolving cleaner for resin build-up.
•
•
Prepare the surfaces and lubricate the bare machine parts with an acid-free lubricating oil
(e.g. WD40 rust inhibitor).
16.2
Maintenance
The machine is low-maintenance and only a few parts need to be serviced. Malfunctions or defects
that could affect your safety must be repaired immediately!
Before each operation, check the perfect condition of the safety devices.
•
Check the condition and tight fit of the saw blade and the saw blade guard before every
•
operation.
Regularly check the perfect and legible condition of the warning and safety labels of the
•
machine.
Use only proper and suitable tools.
•
•
Use only original spare parts recommended by the manufacturer.
Repair work may only be carried out by qualified personnel.
•
Maintenance plan
The type and degree of machine wear depends to a large extent on the operating conditions. The
following intervals apply when the machine is used within the technical limits:
Interval
Before usage
HOLZMANN Maschinen GmbH
WAR N I N G
C AU TI O N
Components
Machine
Loose fixing bolts, screws
Control panels, display
www.holzmann-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
N O TE
Clean
Check for tight fit, tighten if necessary
Check for function, replace if necessary
Action
FKS400V32PRO_400V
58
Publicidad
