GreenWorks Tools 51027 Manual De Utilización página 20

EN
FR DE ES
DETERGENT TANK
Remove the cap from the detergent tank to add detergent
to the pressure washer.
HIGH PRESSURE HOSE STORAGE
Once the high pressure hose is rolled, hang it on the
back of the machine using the hook-and-loop strap to
secure in place.
ON/OFF SWITCH
This switch turns the pressure washer on and off.
GUN
The pressure washer gun has a gripping surface that
provides added control of the lance and helps reduce
fatigue.
TRIGGER WITH LOCK OUT
The trigger lock-out prevents accidental use of the high-
pressure trigger.
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully cut the box down the sides then remove the
product and any accessories from the box.
WARNING:
This new product has been shipped in a partially
assembled condition as described below.
If in doubt, call Greenworks Tools Customer Service for
assistance. Operation of a product hat may have been
improperly preassembled could result in serious personal
injury.
Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call
Greenworks Tools Customer Service for assistance.
WARNING:
If any parts are damaged or missing do not
operate this product until the parts are replaced.
Use of this product with damaged or missing
parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
is misuse and could result in a hazardous
condition leading to possible serious personal
injury.
IT PT NL SV DA NO
ENGLISH(Original Instructions)
FI HU CS RU RO PL
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
ASSEMBLING WAND TO WASHER GUN. (See Figure
3.)
Installing Wand to Pressure Washer Gun
Insert the male baynet end(1) of the wand into the
female bayonet outlet(3) firmly.While pushing in the
to ensure a leak-free connection.
CONNECTING HIGH PRESSURE HOSE TO TRIGGER
HANDLE (See Figure 4.)
Connect the high pressure hose to the trigger handle.
CONNECTING THE WATER SUPPLY TO PRESSURE
WASHER (See Figure 5.)
18
SL HR ET LT LV SK BG
3
4
5