Publicidad
Machine Set-up Guide
!
PLEASE READ BEFORE COMMENCING ANY OPERATION AFTER THE REMOVAL OF
ALL THE PACKAGING, CAREFULLY OPEN AND CHECK THE CONTENTS.
TBL8572 CONTENTS
● 2 x Ignition Keys
● 1 x 30 Amp Fuse (Brush)
● 1 x 20 Amp Fuse (Vac)
● 1 x 2.5 Amp Fuse
● Maxi Fuse-puller
Lift top tank assembly to reveal battery
compartment, ensuring you use the
handle grip provided.
Fit vacuum and brush fuses (contained
in start-up pack) into the fuse holders as
illustrated. (Fig. 1, 2, 3.)
Charge the machine to activate the
batteries. After the batteries were
activated, LEDs should illuminate on the
top of all the batteries.
Insert Key into ignition located on the
control panel (See below (Fig. A)
1
Numatic International Ltd recommends ONLY using 911948 NX1K LFP battery type Lithium Batteries provided with this machine.
!
ENSURE THAT NO METAL OBJECTS COME INTO CONTACT WITH BATTERY TERMINALS
A
2
WHILE THE BATTERIES ARE EXPOSED.
Insert the Ignition key and
switch the machine on.
(Fig. A)
Depress control handle with both hands (Fig.B)
and slowly drive machine off of the pallet.
When the machine is removed and in a safe position,
turn key back to the position (0) 'OFF'
Note: During vehicular transportation ensure
the product is secured to avoid unnecessary
movement.
Fuse Location
3
B
16
16
!
Use handle grip when
raising or lowering the
top waste-tank.
20Amp
30Amp
!
EN
Publicidad
