Publicidad
Idiomas disponibles
Idiomas disponibles
CUTOUT
A
CHANGE OF PERIMETER PLATE
Recommended: Use fireproof gypsum board panels (type X fire rated gypsum board complying with ASTM E84), suitable for the opera-
ting conditions in terms of temperature (at least 80°C) and humidity (at least 93%) reached during application.
For installation, follow the instructions below:
CAUTION
I
Maximum panel weight for ECEX40SS is 4,100 kg.
Maximum panel weight for ECEX60SS is 8,200 kg.
NOTE: The panel must fit within the perimeter plate margin, so the
size of the panel must match the dimensions of the hood's plate.
1
Open the plate and remove the 2 screws from each of the 2
hinges that hold it to the hood.
2
Remove the plate from the hood and remove the 6 screws that
attach each panel to the plate.
(ECEX40SS: 6 screws, ECEX60SS: 12 screws)
ACCESSORIES AND CONSUMABLE PARTS
600 CFM internal Blower Kit
1200 CFM Internal Blower Kit
1200 CFM External Blower Kit
600 CFM in-line Blower Kit
1200 CFM In-line Blower Kit
C
B
KIT
Model
ECEX40SS
A
19
⁄
" (48.70 cm)
11
6 4
B
39
1
⁄
" (99.70 cm)
4
Minimum:
Maximum:
C
1.5 cm
3
Install the panel in place of the plate and tighten with the
screws removed earlier.
IMPORTANT: The thickness of the panel must be at least 9mm.
NOTE: If required, a hole can be drilled in the center of the plate
and screwed in.
4
Replace the plate on the hood, fastening the 4 hinge screws
and close the plate.
Part
ECEX40SS
KIT0198147
KIT0198146
KIT0153054
KIT0198148
KIT0154387
7
Model
ECEX60SS
23
⁄
" (60.65 cm)
7
8
59
1
⁄
" (150.50 cm)
4
Minimum:
Maximum:
3.5 cm
1.5 cm
ECEX60SS
3.5 cm
Publicidad
