Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
To fix stably, the appliance must be placed on a flat and solid surface. It should not be laid on any
soft material.
Choose a location where there is no heat source. Keep the refrigerator away from direct sunlight or
other appliance producing heat.
Choose a dry and well-ventilated place where there is no corrosive air.
In order to improve efficiency of the cooling system and save energy, it is necessary to maintain
good ventilation around the appliance for the dissipation of heat. For this reason, sufficient clear
space should be available around the refrigerator. Suggest: It is advisable for there to be at least
75mm of space from the back to the wall, at least 100mm from its top, at last 100mm from its side
to the wall and a clear space in front to allow the doors to open 135°. As shown in following diagrams.
FIRST USE
Before the use of the refrigerator, remove all the packages, including bottom cushion and foam pads
and rubber belts in the refrigerator.
Adjust the feet and clear the outside and inside of the refrigerator with warm cloth.
Do not start the refrigerator immediately after vertical placement. Only start it after 2-6 hours
standing to ensure its proper operation.
To prevent damage to the power cord and any consequence incidents, the power cord should be
not covered by the refrigerator or other objects. Before switching on the refrigerator, please check
the voltage range of refrigerator carefully if the same as that of the power supply.
When the refrigerator is first installed, allow it stabilize at normal operating temperatures for 2-3
hours prior to filling it with fresh or frozen foods.
If operation is interrupted, waits 5 minutes before restarting.
48
Publicidad
