Publicidad
Idiomas disponibles
Idiomas disponibles
DISPLAY CONTROLS
Use your appliance according to the following control regulations, your appliance has the
corresponding functions and modes as the control panels showed in the pictures below. When the
appliance is powered on for the first time, the backlight of the icons on display panel starts working.
If no buttons have been pressed and the doors are closed, the backlighting will turn off.
CONTROLLING THE TEMPERATURE
We recommend that when you start your refrigerator for the first time, the temperature for the
refrigerator is set to 5°C and the freezer to -18°C. If you want to change the temperature, follow the
instructions below.
Caution! When you set a temperature, you set an average temperature for the whole refrigerator
cabinet. Temperatures inside each compartment may vary from the temperature values displayed
on the panel, depending on how much food you store and where you place them. Ambient
temperature may also affect the actual temperature inside the appliance.
1. Fridge
Press "Fridge" to set fridge temperature between 2°C and 8°C as needed, and control panel will
display corresponding values according to the following sequence.
Fridge temperature: Displays the fridge temperature.
Fridge temperature button: Press the button to set fridge
temperature.
Freezer temperature: Shows temperature selected for the freezer.
Freezer temperature button: Displays the freezer temperature.
Mode: Depending on the selected mode, one of the icons shown in
the display will light up.
Mode button: Press the button to select the operating mode of the
appliance. Press this button for 3 seconds to unlock the display.
49
Publicidad
