Publicidad
Idiomas disponibles
Idiomas disponibles
7. Place the lower door on a smooth surface with its panel upwards. Loose screws ③ , detach part
② and part ①. Turn part ① by 180° and then install part ① and part ② to corresponding
position on left side together with screws ③.
8. Change screw hole covers on middle cover plate from left to right(as shown in figure below).
9. Place refrigeration flat, remove part ② and then loose screws ④. Remove part ①and part ③.
10. Screw out lower hinge. Change it to the near hole site, and then screw up and mount washer.
11. Just remount to the step 9. Change part ① and part ② to left and then fix them with screws ④.
Change part ③ to right, and install it.
Step 5
Step 7
Lower hinge part (right)
Leg front (right)
Leg front (left)
Self-tapping-screws
Step 9
Step 6
Lower hinge part (left)
Step 11
52
Step 8
Publicidad
