Publicidad
Idiomas disponibles
Idiomas disponibles
1 4
SETUP INSTRUCTIONS
CONNECTING CABLES AND INSERTING
PLUGS
When inserting the plugs, be sure to align the flat side of the
plug with the flat side of the slot and push in gently. This is
to avoid bending the pins in the plug.
Insert cable into the appropriate connector prior to starting
therapy.
POWERING UP THE DEVICE
When powering up the device for the first time, always use
mains power even if a battery is connected. Insert the power
cord into the back of the unit, insert the plug into a power
outlet, do not position the Intelect® Legend 2 in such a way
that makes it difficult to disconnect from the mains power.
Switch device on with ON/OFF switch on the back of the unit
1. The Initialization screen below will be shown for a few
seconds whilst the device starts.
2. The first setup screen will be displayed after this allowing
the user to set language, device name, time and choose
patient pain scale as either NRS (Numerical Rating Scale) or
VAS (Visual Analogue Scale).
3. Click on "Continue" button to go to home screen
DEVICE CONNECTED TO THE MAINS
1. Plug the Power cord into the back of device. Plug the other
end of the cord into an electrical outlet.
NOTE: The Power Cord may be unplugged from the back of
the unit in an emergency situation.
2. Turn on the ON/OFF switch located on the back of the
device.
3. Press ON/OFF button on LCD Front panel
4. Select desired function on the Home Screen
INTELECT
LEGEND 2 USER MANUAL
®
DEVICE WORKING ON BATTERY
1. Press the ON/OFF button on the LCD Front panel.
2. Select desired function on the Home Screen.
STOP TREATMENT AND TURN OFF THE
DEVICE
Press Play/pause button to pause treatment then press stop
on touch screen. If device is on mains power press the on/
off button on the front panel then turn off the switch on the
back of the unit.
If device is working on battery follow the above procedure
but to switch off only press the on/off button on the front
panel
Intelect Legend 2
EN
Publicidad
