Publicidad
Idiomas disponibles
Idiomas disponibles
26
USER INTERFACE
SETTINGS
The settings icon on the top right hand corner of the home screen menu bar offers users the opportunity to set preferences
and can be accessed by pressing the
Swipe vertically to see more settings
1.
On the home screen, the "current screen name" displayed in the middle portion of the menu bar is by default 'Intelect®
Legend 2' .
2.
Language: touch this box if you want to choose another language
3. The device name can be changed to a name of your choice, e.g clinic name to do this press the Device name button and
enter the new name with the displayed keyboard press Enter and the new device name will be displayed on the home
screen.
4.
The date and time can be set by pressing the date and time button, date format and time format can also be set in this
screen.
5. Press the screen and sounds button to enter this menu:
» To adjust the display brightness, select Brightness button. The brightness range is 0% (dimmest) to 100%
(brightest) in increments of 10%. Default setting is 80%.
» To adjust the volume of sound, select the volume button. The volume range is 0% (off) to 100% (loudest) in
increments of 10%. Default setting is 40%.
» Pressing the keyboard sounds button selects either on or off for keyboard sounds. Default setting is ON.
» Pressing the Keypad layout button allows the keypad format to be changed to QWERTY, AZERTY or QWERTZ
» Pressing the US coupling sound button allows the user to switch between US coupling sound on or off.
Default setting is ON.
6. Press the Ultrasound button to enter this menu:
» Pressing the US coupling sound button allows the user to switch between US coupling sound on or off.
Default setting is ON
» Pressing the coupling time button allows the user to switch between Pause (treatment time stops counting
down while applicator is uncoupled) and No pause (treatment time will count down even if ultrasound head is
uncoupled). Default setting is Pause.
7.
Pressing the Display unit version information will show current software version serial number and several device
parameters as shown below.
8. Choose pain scale display as NRS or VAS by pressing pain scale button to set required option.
9. Pressing the Data Transfer button will enable the device to connect via Bluetooth® to a Bluetooth® enabled Computer.
10. Press Reset to factory defaults to restore the device to the factory settings, pressing this button will result in a restart
and the user will be taken to the initial setup screen on restart.
11. When a USB drive is inserted a new button appears to allow safe ejection of the USB drive, simply press the button and
follow the on screen prompts.
INTELECT
LEGEND 2 USER MANUAL
®
button.
EN
Publicidad
