DJO Global Intelect Legend 2 Manual Del Usuario página 18

1 8 SYSTEM
WAVEFORMS
Advice on size and type of electrodes to be used is given
in device User Interface treatment guidelines.
CC: Constant Current
IFC (Interferential) Traditional (4 Pole)
Advice on size and type of electrodes to be used is given in
device GUI "treatment guidelines" feature
Interferential Current is a medium frequency waveform.
Current is distributed through two channels (four
electrodes). The currents cross each other in the body at
the area requiring treatment. The two currents interfere
with each other at this crossing point, resulting in a
modulation of the intensity (the current intensity increases
and decreases at a regular frequency).
Output Mode
Available on Channel
Treatment Time
Mode Selection
Output Intensity
Beat Frequency
Carrier Frequency
Cycle Time
Sweep Time
Sweep Low Beat Frequency
Sweep High Beat Frequency
Scan Percentage
IRMS
DC component
TENS- Asymmetrical Biphasic
Advice on size and type of electrodes to be used is given in
device GUI "treatment guidelines" feature
The Asymmetrical Biphasic waveform has a short pulse
duration. It is capable of strong stimulation of the nerve
fibers in the skin as well as of muscle tissue. This waveform
is often used in TENS devices.Because of its short pulse,
the patient typically tolerates the current well, even at
relatively high intensities.
Output Mode
Output Intensity
Available on Channel
INTELECT LEGEND 2 USER MANUAL
®
CV: Constant Voltage
Electrodes
1 & 2, 3 & 4
1-60 Minutes
CC
0-100 mA (CC)
1-200 Hz
2000-10,000 Hz
Continuous or User Defined
14 sec
1-199 Hz
2-200 Hz
Static, 40%, 100%, Manual
0-78mA
No
Electrodes
0-140 mA (CC) 0-140 V (CV)
1, 2, 3, 4
Treatment Time (Stim)
Treatment Time (Combo)
Mode Selection (Stim)
Mode Selection (Combo)
Amplitude Modulation
Burst Frequency
Cycle Time
Frequency
FrequencySweep
Phase Duration
Sweep time
Sweep Low Frequency
Sweep High Frequency
IRMS
DC component
TENS- Symmetrical Biphasic
Advice on size and type of electrodes to be used is given in
device GUI "treatment guidelines" feature
The Symmetrical Biphasic waveform has a short pulse
duration and is capable of strong stimulation of nerve fibers
in the skin and in muscle. This waveform is often used in
portable muscle stimulation units, and some TENS devices.
Output Mode
Available on Channel
Treatment Time (Stim)
Treatment Time (Combo)
Mode Selection (Stim)
Mode Selection (Combo)
Output Intensity
Amplitude Modulation
Burst Frequency
Cycle Time
Frequency
Frequency Sweep
Phase Duration
Ramp
Sweep Time
Sweep Low Frequency
Sweep High Frequency
IRMS
DC component
EN
1-60 minutes
1-30 minutes
CC or CV
CV
0% (off) to 100% on 10% steps
0-10 bps
Continuous or User Defined
1-200 pps
On/Off
30-400 μsec
14 sec
1-199 pps
2-200 pps
0-50mA
No
Electrodes
1, 2, 3, 4
1-60 min
1-30 minutes
CC or CV
CV
0-140 mA (CC) 0-140 V (CV)
0% (off) to 100% on 10% steps
0-10 bps
Continuous or User Defined
1-200 pps
On/Off
30-400 μsec
0-5 sec
14sec
1-199 pps
2-200 pps
0-50mA
No