DJO Global Intelect Legend 2 Manual Del Usuario página 32

32 USER INTERFACE
ULTRASOUND OPERATION
Complete the following steps to begin Ultrasound treatment:
1. To prepare the patient's skin for Ultrasound Therapy,
PREPARATION section.
NOTE: Use only Intelect Legend 2 Ultrasound Applicators . Previous models of Chattanooga Ultrasound Applicators will not work
®
with the Intelect Legend 2.
®
2. From the home screen, select the Ultrasound icon
3. SET UP TREATMENT
On the treatment review screen you can adjust treatment parameters to desired level.
Never start with intensity adjustment – first adjust all other parameters and set Intensity just before starting treatment
Save and Assign to buttons behave the same as in Electrotherapy treatment.
4. START TREATMENT
Press the START button to begin the therapy
5. PAUSE TREATMENT
Press the Start/Pause button. To resume treatment, press the Start /Pause button again.
Note: Pause applies to the selected channel only
6. STOP TREATMENT
- First pause treatment by pressing the Start/Pause button
- Then press the 'Stop treatment ' box on the treatment review screen.
When treatment has completed, the Treatment Summary screen will appear with the following options:
• Repeat the treatment by pressing Run again.
• Save
» the treatment protocol to the Custom Protocols
• Assign to:
» Assign therapy information to treatment data
» Open Pain scale to record post-treatment pain
• Exit Modality and return to home screen
INTELECT LEGEND 2 USER MANUAL
®
prepare patient as described in the ULTRASOUND PATIENT
EN