Publicidad
Idiomas disponibles
Idiomas disponibles
The operation
of any tractor
can
result in foreign
objects
thrown
into the
eyes, which
can result in severe
eye damage.
Always
wear safety glasses
or eye shields
while
operating
your tractor
or performing
any adjustments
or repairs.
We recommend
standard
safety
glasses
or a wide vision safety
mask worn
over spectacles.
HOW
TO USE
YOUR
TRACTOR
TO SET PARKING
BRAKE
Your tractor
is equipped
with an operator
presence
sensing
switch.
When
engine
is running,
any attempt
by the operator
to leave the seat without
first setting
the
parking
brake will shut off the engine.
1.
Depress
clutch/brake
pedal all the way
down and hold.
2.
Pull parking
brake lever up and release
pressure
from clutch/brake
pedal.
Pedal should
remain
in brake
position.
Make sure parking
brake will hold trac-
tor secure.
Throttle/
Choke
Control
Attachment
Clutch Lever
ed" Position
nition Key
_gaged"
Position
Motion Control
Clutch/
Brake
"Disengaged"
Position
Parking Brake
"Brake"
"Engaged"
Position
Position
STOPPING
MOWER BLADES -
• To stop mower blades, move attachment
clutch lever to disengaged position.
GROUND DRIVE -
• To stop ground drive, depress clutch/
brake pedal all the way down.
• Move motion control lever to neutral (N)
position.
ENGINE
-
• Move throttle
control
between
half and
full speed
(fast) position.
NOTE:
Failure
to move throttle
control
between
half and full speed
(fast) posi-
tion, before
stopping,
may cause
engine
to
"backfire".
• Turn ignition
key to "STOP"
position
and
remove
key. Always
remove
key when
leaving
tractor
to prevent
unauthorized
use.
• Never use choke to stop engine.
IMPORTANT:
Leaving
the ignition
switch
in any position
other than "STOP" will
cause the battery
to discharge
and go
dead.
NOTE:
Under
certain
conditions
when
tractor
is standing
idle with the engine
running,
hot engine
exhaust
gases may
cause "browning"
of grass.
To eliminate
this possibility,
always
stop engine
when
stopping
tractor
on grass areas.
_,CAUTION:
Always
stop tractor
com-
pletely,
as described
above,
before
leaving
the operator's
position.
TO USE THROTTLE
CONTROL
Always
operate
engine
at full speed
(fast).
• Operating
engine
at less than full speed
(fast) reduces
engine's
operating
ef-
ficiency.
• Full speed
(fast) offers the best mower
performance.
TO MOVE FORWARD AND BACKWARD
The direction and speed of movement is
controlled by the motion control lever.
1. Start tractor with motion control lever in
neutral (N) position.
2. Release parking brake.
3. Slowly move motion control lever to
desired position.
TO ADJUST
MOWER
CUTTING
HEIGHT
The position
of the attachment
lift lever
determines
the cutting
height.
• Grasp
lift lever.
• Press plunger
with thumb
and move
lever to desired
position.
The cutting
height
range is approxi-
mately
1-1/2 to 4". The heights
are mea-
sured from the ground
to the blade tip with
the engine
not running.
These
heights
are approximate
and may vary depending
upon soil conditions,
height
of grass and
types of grass being mowed.
• The average
lawn should
be cut to ap-
proximately
2-1/2
inches
during
the cool
season
and to over 3 inches during
hot
months.
For healthier
and better looking
lawns,
mow often and after moderate
growth.
• For best cutting
performance,
grass over
6 inches
in height
should
be mowed
twice.
Make the first cut relatively
high;
the second
to desired
height.
13
Publicidad
