Angelo Po 08WFA2PG Manual De Uso página 173

PART REPLACEMENT
REPLACING TOP BURNER PILOT LIGHT NOZZLE
To carry out this operation, proceed as follows.
Turn off the gas supply tap
1)
Pull off the knobs (A).
2)
Undo the screws (C) and remove the control
3)
panel (B).
Remove the pipe (D).
4)
Remove the nozzle (E) and replace it with the
5)
one suitable for the type of gas in use (see
table at back of manual).
Replace the pipe (D), the control panels (B)
6)
and the control knobs (A).
REPLACING OVEN BURNER PILOT LIGHT NOZZLE
To carry out this operation, proceed as follows.
Access the pilot light through the opening
1)
provided in the bottom of the appliance.
Unscrew the cap (B).
2)
Remove the nozzle (C) and replace it with the
3)
one suitable for the type of gas in use (see
table at back of manual).
Replace the cap (B).
4)
To carry out this operation, proceed as follows.
Turn off the gas supply tap
1)
Undo the screws (B) and remove the control
2)
panel (A).
Undo the screw (C).
3)
Extract the bushing (D) and replace it with
4)
the one suitable for the type of gas in use
(see table at back of manual).
Replace the control panel.
5)
3329590_inst_GB_rev.2
REPLACING OVEN BURNER AIR BUSHING
ENGLISH
19