Sony GV-D300 Manual De Instrucciones página 71

Trouble check
* Operation
Symptom
No sound or only a low sound is heard
when playing back a tape.
The new sound added to the recorded
tape is not heard.
The title is not displayed.
The title is not recorded.
The cassette label is not recorded.
Displaying the recorded date, date search
function does not work.
The title search function does not work.
CI indicator does not appear when using
a tape with cassette memory.
Cause and/or corrective actions
The stereo tape is played back with HiFi SOUND set to 2
in the menu system.
% Set it to STEREO. (p. 13)
The volume is turned to the minimum.
> Press VOLUME +. (p. 10)
AUDIO MIX is set to ST2 side in the menu system.
> Adjust AUDIO MIX in the menu system (p. 20).
AUDIO MIX is set to ST1 side in the menu system.
> Adjust AUDIO MIX in the menu system (p. 20).
TITLE DSPL is set to OFF in the menu system.
% Set it to ON in the menu system. (p. 20)
The tape has no cassette memory.
> Use a tape with cassette memory. (p. 38)
The cassette memory is full.
> Erase another title. (p. 41)
The tape is set to prevent accidental erasure.
? Slide the protect tab so that red portion is not visible.
(p. 9)
Nothing is recorded in that position on the tape.
> Superimpose the title to the recorded position. (p. 40)
The tape has no cassette memory.
> Use a tape with cassette memory. (p. 44)
The cassette memory is full.
> Erase some titles. (p. 41)
The tape is set to prevent accidental erasure.
? Slide the protect tab so that red portion is not visible.
(p. 9)
* The tape has no cassette memory.
» Use a tape with cassette memory. (p. 24)
¢ CM SEARCH is set to OFF in the menu system.
> Set it to ON. (p. 24)
¢ The tape has no cassette memory.
> Use a tape with cassette memory. (p. 26)
¢ CM SEARCH is set to OFF in the menu system.
> Set it to ON. (p. 26)
¢ There is no title in the tape.
» Superimpose the titles. (p. 38)
The gold-plated connector of the tape is dirty or dusty.
> Clean the gold-plated connector. (p. 59)
Continued to the next page
71