Other Parameters And Functions - Auxilab MEDIBAS+ Manual De Uso

13.
In case of mechanical failure or not correct parameter during parameter setting process,
an alarm will sound. Press button
parameters.
14.
Press button
when zero is reached the equipment will automatically stop (if the centrifuge needs to be
stopped during on half-way press the button
to the selected deceleration rate) and when zero is reached the centrifuge lid will
automatically open; an alarm of end of centrifugation will sound and it can be stopped by
pressing

5. 10 Other parameters and functions

5.
Centrifugal force setting: to set RCF instead of speed press
Speed/RCF will flash and RCF LED will light on → Turn the parameter setting knob until
the desired value is displayed.
6.
For short spin of samples keep pressed button
running until reached the selected speed and centrifugation time will be displayed. Once
Figure 7: Display after parameter setting
, the centrifuge will start running, time will gradually decrease and
. The centrifugation is completed.
to stop the alarm and review the selected
). Speed will also decrease (related
, and the centrifuge will start
- 44 -
twice→ Digits on