Personal Protection; Light Radiations; Working Area - Helvi COMPACT 220AC/DC Manual De Instrucciones

PERSONAL PROTECTION

• Workers and their assistants must protect
themselves by wearing closed, non-flamma-
ble protection coveralls, without pockets or
rolled sleeves or legs. Any residue of oil or
grease must be cleaned from the garments
before wearing them. Only wear CE marked
garments suitable for arc welding (Fig. 1):
1. Gloves;
2. Apron or jacket
made of crust lea-
ther;
3. Gaiters to protect
the shoes and the
bottoms of the trou-
sers;
4. Protection shoes
with steel toes and
rubber soles;
5. Mask (please con-
sult the paragraph
on light radiations);
6. Crust leather slee-
ves to protect the
arms.
Caution: Make sure all protection
garments are in good conditions
and replace them regularly in or-
der to ensure perfect personal
protection.

LIGHT RADIATIONS

• Warning: Never stare at an electric arc wi-
thout suitable eye protection (Fig. 2).
• Users must wear fireproof helmet or mask,
designed in such a manner as to offer protec-
tion to the neck and face (including the sides)
24
Fig.1
Fig.2
against the light of the electric arc (glare from
the visible light and infrared and ultraviolet
radiations). The helmet or the mask must be
equipped with a protector whose degree of
opacity will depend on the welding procedure
and on the value of the electric arc current,
according to the values contained in Table 1
(EN 169).
Plasma Coated
DIN
cutting electrodes
9 20 - 39A
10 40 - 79A 125 - 174A 20 - 39A
11 50 - 149A 80 - 174A 175 - 224A 40 - 99A
12 150 - 249A 175 - 299A 225 - 274A 100 - 174A
13 250 - 400A 300 - 499 275 - 349A 175 - 249A
14
MIG for MIG for
DIN Light Al-
loys Pieces
9
10 80 - 99A 80 - 99A
11 100 - 174A 100 - 174A 80 - 124A
12 175 - 249A 175 - 299A 125 - 274A
13 250 - 349A 300 - 499A 275 - 349A
14 350 - 499A 500 - 550A 350 - 449A
Table 1
• The colored filter (inactinic filter) must be
kept clean at all times. Should it break or dete-
riorate (Fig. 3), replace it with a new filter, with
the same degree of opacity. The colored filter
must be protected against impact and welding
projections by means of a transparent glass
positioned on the anterior part of the mask.
This transparent glass must be replaced whe-
never visibility is reduced during welding.

WORKING AREA

Welding operations must be carried out in
a sufficiently ventilated place, isolated from
other working areas. If this is not possible,
anyone near the person operating the wel-
ding machine and their assistants must be
protected by curtains and transparent opa-
Arc/Air
Carbon
Electrodes
5 - 19A
500A 350 - 449A 250 - 400A
Steel MAG
40 - 79A
Fig.3
TIG