HTW FP-27AA Manual De Usuario E Instalacion página 18

1. [ON/OFF] button
You can start the air-conditioner by pressing this button and stop its operation by pressing it again.
2. [SPEED] button
You can select fan speed from "Lo", "Mid", "High", "Auto".
e
[SWING2] button
3.
Press this button, the vertical wind direction vanas can rotate automatically, when you have the
desired horizontal wind direction, press it again, the vertical wind direction vanas will be stopped
at the situation of your choice.
[FEELING] button
4.
When it displays "FEELING" button:
Press this button can be used to set the feeling function. The LCD shows the actual room
temperatura when the function set and it shows the setting temperatura when the function
cancelled. This function is invalid when the appliance at the Fan mode.
[STRONG] button
5.
Only under the state of cooling or heating mode, press this button, the fan speed is adjusted to
strong auto-maticlly and the LCD displays "high fan" , the "strong" function is started to reach
the highest cooling or heating.
6. [TIMER] button
This buttton is u sed to set the Timing On or the Timing Off function.
[SCREEN] button
7.
You can let the LCD display work or not by pressing this button.
[ ] or [ ] button
L',.
'v
Press the " L',. " or "
will changa when you touch the button.
[CLEAN] button:
8.
a. When remota controller is at the off state, press "clean" button, the wind guiding bars
turn to initial postions for cooling, the A/C runs "clean" function with max duration 35mins.
The purpose of this function is to clean dust on evaporator and dry the inside water of
evaporator and to prevent the evaporator going moldy due to water deposition and
boasting strange smell.
9. [MODE] button:
This enables you to select different operation mode. After each pressing, the operation mode
will be changed.
It shows in the following display.
Low � Mid
:
'v " button,you can set the temperatura ranga from 16"C to 32"C,
-
j j
� High � Auto
e
-
f]
Display