HTW FP-27AA Manual De Usuario E Instalacion página 21

3.Timer buttton mode
Clock function
Clock setting during using period,the method just like below:
1.Open the lid of the remate controller,then press Timer/Clock button,the Clock function is
activated.
2.Press the "l::,." or "'v " button to set the clock time, The time is 12-hour system with a.m.&
p.m.
3.Press the TIMER button again to confirm the clock time.
Timing ON Function
Timing ON function must be set when the air conditioner is off.
The method just like below:
1.Press TIMER button, the letter "ON" will be displayed and flicker.
2.Press the "l::,." or "'v" button to set the time, the time is 12-hour system with a.m.& p.m.
3.Press the TIMER button again to confirm the clock time.
4.Press other button to select the operation condition.(including mode ,temperature, swing, fan
speed, .).
Note
When the Clock or Timing on setting is the same as the setting time, the air conditioner will
automaticlly close or operate.
Sleep operation mode
1.Press ON/OFF button, the air conditioner starts to operate.
2.Press the MODE button to select cooling or heating status.
3. Open the lid of the wired controller, press the SLEEP button,the display will shows,the
sleeping function will be activated.
4.Press SLEEP button again ,the sleeping function will be cancelled. Then the air conditioner will
keep its setting to operate.
5.Press ON/OFF button ,the air conditioner stops.
When the sleep function starts,it will operate like follows:
1.Cooling mode:
T+1(
1st hour
2.Heating mode:
T-2(
1st hour
3. The sleep mode will last for 7 hours ,and then stop automatically.
C) °
°
T +2( C)
2nd hour
°
C)
º T-4( C)
2nd hour
Keep running for
another 5 hours
Keep running for
another 5 hours
Stop
automatically
Stop
automatically