Publicidad
Idiomas disponibles
Idiomas disponibles
English
Owner´s manual
Nuts and bolts
Check that all screws and nuts are tight; especially the nuts that fix the hitches to the machine,
the nuts that fix the wheels and those that fix the engine. Lubricate the steering column stop rod
sliding bushings.
Clutch
Originally the position of lever A (fig.17) is
normal.
Engine
For maintenance intervals, follow the instructions given in the engine operating manual. You
should check the oil level every 4 hours of work and replace it every 50 hours of work. Always
use good quality oil as indicated in the engine instruction book.
Air filter
If working in dusty conditions, wash the filter strand and add oil every 8 hours.
Use the same oil as for the engine. For engines that have a paper filter air filter, clean this
element with air or replace it if it is severely clogged.
Gearbox
A
Check the oil gauge every 50 working
hours by removing the plug A and
check that, with the machine in
horizontal position, the oil reaches the
B
two notches B/C (fig.16).
If necessary, add SAE 80W/90
manual gearbox oil.
C
4. STORAGE
If the machine is not to be used for a long period of time, it is advisable to take the following
precautions:
• Empty the carburetor.
• Drain the engine of oil.
• Lubricate the cylinder by introducing a few drops of the same type of oil used for the engine
through the plug hole and turning the engine several times without starting it. If it is a Diesel
engine, remove the injector by unscrewing the two screws that hold it to the cylinder head and
pour a little oil into the hole.
• Clean the engine and machine thoroughly.
26
Publicidad
