Silvercrest SEM 1100 D3 Instrucciones De Uso página 15

1) When the appliance is heated up:
To prepare an espresso, place the small espresso sieve p into the sieve
holder i .
To prepare two espressos, place the large espresso sieve o into the sieve
holder i .
2) Fill the small espresso sieve p with espresso powder up to the Max marking .
This corresponds to approx . 7 g of powder or a level measuring spoon a .
Or . . .
Fill the large espresso sieve o with espresso powder up to the Max marking .
This equates to about 7 g + 7 g of powder or two level measuring spoons a .
3) Tamp down the espresso powder using the compactor on the measuring spoon a .
Add more espresso powder, if required, until the espresso sieve o p is full
up to the Max marking . Tamp the coffee powder down once again .
NOTE
► Compaction of the coffee powder is an essential process for the prepar-
ation of an espresso . If the espresso powder is compacted very strongly,
the espresso runs through more slowly and more crema is generated . If the
espresso powder is not so strongly compacted, the espresso runs through
more quickly and it creates very little crema .
4) Place the sieve holder i in the appliance at the "INSERT" mark, then
turn it clockwise until the handle of the sieve holder i is facing the front
("I" mark) .
5) Place one (or two) cup(s) under the sieve holder openings . We recommend
that you rinse the cups out with hot water beforehand, so that the espresso
does not cool so quickly . You can place the cups onto the storage space 6 .
6) As soon as the "Espresso" control lamp t lights up continuously, press the
"Espresso" button
WARNING
Never remove the sieve holder i while the espresso is coming
out!
The resulting spray of hot espresso would lead to injury!
► Always press the "Espresso" button
output before removing the portafilter i
7) Once the cups are filled up to the required amount (about 20 ml per cup),
press the "Espresso" button
You can now drink the espresso .
8) Switch the appliance off with the on/off switch 1 .
■ 12 │ GB │ IE
3 . The espresso flows into the cup(s) .
3 again to stop the espresso
3 to stop the water being pumped through .
SEM 1100 D3