Publicidad
Idiomas disponibles
Idiomas disponibles
MONOBLOCK UNIG
Note: The machine performs best when it is installed
on a wall with a thickness not exceeding 240mm.
Roll the plastic vent sheets into a tube and feed them
from the inside into the holes previously made. Ensure
the tubes sit flush to the interior wall.
Insert the indoor fixing ring from the vent cover onto the
indoor side of the air vent. Then fold the external vent
cover in half. Attach the chains to each side of the vent
cover, before sliding the cover outside through the vent
hole.
the chain. Paste the sealing strip in the accessories along the edge of
the back for whole circle of the machine, cut off the excessive length if
needed.
Go outside and trim off
the excess vent tube using a sharp knife,
keeping the edge as neat as possible.
Expand the external cover, before tightly fixing the chains by hooking onto the
indoor fixing ring. This will hold the external cover firmly in position. Repeat for
the second vent.
Once the chains are fitted and secure, any
excess chain should be removed by cutting
Fig 1
USER AND INSTALLATION MANUAL
INSTALLATION
3.
41
Publicidad
