Publicidad
Idiomas disponibles
Idiomas disponibles
FREQUENCY/DUTY RATIO MEASUREMENT (PICTURE 6)
1) Insert the red test lead into the
2) Turn the function dial to the Hz% position, and connect the test leads with both ends of the
measured signal source in parallel.
3) Short press the SELECT button to switch to frequency/duty ratio measurement.
Note:
- Do not input voltage higher than 30Vrms to avoid personal injury.
- After completing the measurement, disconnect the test leads from the circuit under test.
NON-CONTACT AC VOLTAGE SENSING (NCV) (PICTURE 7)
38
Picture 6
jack, and black into the COM jack.
Picture 7
Publicidad
