Sportplus SP-WR-1900-iE Instrucciones De Montaje página 37

• Always use the product on a horizontal, level, non-slip and solid surface. Never use
the product near water and, for safety reasons, keep at least 1 metre of free space
around the product.
• Make sure that your arms and legs do not come close to moving parts. Do not insert
any materials into existing openings in the product.
CAUTION – PRODUCT DAMAGE
• Do not make any modifications to the product and only use original spare parts.
Only have repairs carried out in a specialised workshop or by similarly qualified
persons – improper repairs can cause considerable hazards for the user. Only use
this product for the purposes described in the operating instructions.
• Protect the product from splashes of water, moisture, high temperatures and direct
sunlight.
SAFETY INSTRUCTIONS ABOUT BATTERIES
FIRE AND EXPLOSION HAZARD!
• Keep the product away from heat sources and direct sunlight: the battery
may explode if overheated. Risk of injury.
• Do not dispose of batteries in a fire.
RISK OF INJURY!
Do not touch leaked batteries with bare hands! There is a risk of injury!
• Leaking or damaged batteries can cause chemical burns if they come
into contact with the skin. Do not touch leaked batteries with bare hands;
therefore, ensure that you wear appropriate protective gloves in such a case!
• Avoid contact with skin, eyes and mucous membranes. In the event of contact with
battery acid, rinse the affected areas immediately with plenty of clean water and
consult a doctor immediately.
• Do not take batteries apart.
ASSEMBLY INSTRUCTIONS
• The product must be assembled carefully and by an adult. If in doubt, seek the help
of another technically experienced person.
• Before you start assembling the product, read the assembly steps carefully and look
at the assembly drawing.
• Remove all packaging material and then place the individual parts on an free
surface. This gives you an overview and makes assembly easier.
Use an underlay to protect the installation surface from soiling or scratching.
• Now check the scope of supply to ensure that all components are present. Do not
dispose of the packaging material until assembly is complete.
• Please note that there is always a potential risk of injury when using tools and
carrying out manual work. Therefore, proceed carefully and prudently when
assembling the product.
• Ensure a hazard-free working environment, e.g. do not leave any tools lying around.
• To assemble the product, simply affix all the screws in the holes provided without
tightening the screws. Align the components and then tighten the screws firmly.
37