ProCore Edge North America
9. Maintenance
9.1 Power Module Replacement
DANGER
Make sure that the charger is completely POWERED OFF and that NO
BATTERY IS CONNECTED before opening the charger door and replacing
a power module. Power module replacement should be performed only by
qualified (service) personnel.
NOTE
Always press the STOP button on the ProCore Edge battery display
before disconnecting SB cables from a battery. Pressing the STOP
button will prevent the possibility of electrical arcing.
CAUTION
Every ProCore Edge is assembled and programmed for each customer's
specific needs. Webasto recommends that you contact Webasto
Technical Support before making any modifications and/or additions
(such as a module) to your ProCore Edge.
31241-03-0202
Webasto Charging Systems, Inc.
46 of 68
IOMM