Webasto ProCore Edge 9 Manual De Operación Y Mantenimiento página 57

IOMM ProCore Edge North America
9.1.8. Reconnect the DC output cable (Figure 36) and AC input
power cable (Figure 37) that were disconnected in step 9.1.2.
9.1.9. Reconnect the ground cable that was disconnected in step
9.1.3 with an M4 flange nut and tighten it with 18.5 in-lbs (2 Nm) of
torque (Figure 37).
Figure 36 Figure 37
Reconnected DC Reconnected Ground
Output Power Cable Cable and AC Input
Power Cable
Close the charger door and use the flathead screwdriver to turn
the latch counterclockwise to lock the door.
9.2. Air Filter Replacement (TBA – not yet available)
9.3. Preventive Maintenance Activities
Table 2 describes the preventive maintenance activities for the first
three years of the system life.
Webasto Charging Systems, Inc. 31241-03-0202
57 of 68