Webasto ProCore Edge 9 Manual De Operación Y Mantenimiento página 58

ProCore Edge North America
Table 2 Preventative Maintenance Schedule
ProCore Edge
Component
Output Cables
Three Output
Cable
Connectors
Cool Air Intake
and Hot Air
Exhaust Vents
ProCore Exterior
ProCore Interior
31241-03-0202
Maintenance Verification / Action
Examine cables and replace any cable
that exhibits signs of damage (splits,
cracks, tears, exposed conductors,
etc.) or excessive wear.
Examine connectors, and replace any
connector that exhibits signs of damage
(splits, cracks, exposed or pitted power
pins, etc.) or excessive wear.
Inspect the cool-air intake vents at
the system back and hot-air exhaust
vents at the system lower-front for any
reduced airflow or blockage. Remove
any airflow obstruction to ensure proper
system cooling.
Examine the charger exterior for signs
of damage or excessive wear. Repair
or replace any system that has been
damaged in such a way that conductors
are exposed, or the cabinet may contact
internal conductors.
Vacuum out dust from the charger
interior, using a vacuum designed for
electronic systems. Pay close attention
to electronic devices to prevent damage.
It may be necessary to vacuum out dust
more frequently if the unit is installed in
a highly dusty environment.
58 of 68
*
*
*
*
Webasto Charging Systems, Inc.
IOMM
Schedule
*
*
*
*
* *