Publicidad
Idiomas disponibles
Idiomas disponibles
4. Before the final tightening ensure that the winding
cable is not squeezed between the controller and
the wooden base as it has to be in the recess
meant for it.
5. Locate the controller frame into its place. The frame
is located in its place by pressing with the hands.
Remove, using for example a knife, the pre-worked
plastic part reserved for the cable.
6. The frame is removed by pressing with a thin rod or
a small screwdriver from the grooves (4) and
turning carefully outwards.
Instructions for environmental protection
This product must not be disposed with normal household waste at the end of its life cycle. Instead, it should be
delivered to a collecting place for the recycling of electrical and electronic devices.
The symbol on the product, the instruction manual or the package refers to this.
The materials can be recycled according to the markings on them. By reusing, utilising the materials or by
otherwise reusing old equipment, you make an important contribution for the protection of our environment.
Please note that the product is returned to the recycling centre without any sauna rocks and soapstone cover.
Please contact the municipal administration with enquiries concerning the recycling place.
9
Publicidad
