VALBERG IH 4 TB1FZS 007C Instrucciones De Uso página 16

C
Useful information
What?
1. Switch the power to the
cooktop off.
2. Soak up the spill
3. Wipe the touch control
Spillovers on the touch area with a clean damp
controls sponge or cloth.
4. Wipe the area completely
dry with a paper towel.
5. Switch the power to the
cooktop back on.
28
How? Important!
• The cooktop may beep and
turn itself off, and the touch
controls may not function
while there is liquid on
them. Make sure you wipe
the touch control area dry
before turning the cooktop
back on.
EN
C
Useful information
Troubleshooting
Operation of your appliance can lead to errors and malfunctions. The following tables contain
possible causes and notes for resolving an error message or malfunction. It is recommended
to read the tables carefully below in order to save your time and money that may cost for
calling to the service center.
Problem Possible causes
The induction hob cannot be
No power.
turned on.
The touch controls are
The controls are locked.
unresponsive.
There may be a slight film
of water over the controls or
The touch controls are
you may be using the tip of
difficult to operate.
your finger when touching
the controls.
• Rough-edged cookware.
The glass is being
scratched.
• Unsuitable, abrasive
scourer or cleaning
products being used.
This may be caused by
Some pans make crackling the construction of your
or clicking noises. cookware (layers of different
metals vibrating differently).
The induction hob makes a This is caused by the
low humming noise when technology of induction
used on a high heat setting. cooking.
29
What to do
Make sure the induction
hob is connected to the
power supply and that it is
switched on. Check whether
there is a power outage in
your home or area. If you've
checked everything and
the problem persists, call a
qualified technician.
Unlock the controls.
See section 'Using your
induction cooktop' for
instructions.
Make sure the touch control
area is dry and use the
ball of your finger when
touching the controls.
• Use cookware with flat
and smooth bases. See
'Choosing the right
cookware'.
• See 'Care and cleaning'.
This is normal for cookware
and does not indicate a
fault.
This is normal, but the
noise should quieten down
or disappear completely
when you decrease the heat
setting.
EN