Publicidad
Idiomas disponibles
Idiomas disponibles
4.4.1 Motor
Enclosed: A minimum air gap of 10 mm must be maintained
around the motor case to allow adequate cooling.
Exposed: A suitable enclosure must be provided. Refer to section
4.3.1.
4.4.2 Hazardous Area Use
This equipment is not designed for use in hazardous
areas.
4.5 Personal Protective Equipment
There are no specific PPE requirements for this
equipment.
Eye protection is recommended when working with pressurised
equipment.
5. Drawings
5.1 General Arrangement
5.1.1 23870
Inlet
5.1.3 VR100
Outlet
Sealing washer
Inlet
3
4.6 Personnel
The equipment shall only be worked on by experienced and
competent personnel, suitably qualified with the installation of
equipment.
Good working practice shall be followed at all times, where
specific regulation is unavailable.
This equipment shall not be operated or maintained by children.
4.7 Equipment
A general tool kit is suitable for the requirements of installation,
operation and maintenance.
4.8 Notices & Markings
The equipment is supplied with a label containing important
information about the equipment.
These notices / markings shall not be removed or defaced under
any circumstances.
5.1.2 VR050
Inlet
Outlet
Sealing washer
Outlet
Sealing washer
Publicidad
