Two Towers
Take the installation procedure for six battery modules as an example.
As for the installation steps for the following figure, please refer
to the step 1~26 for the installation procedure for the left tower
and the step 1~12 for the installation of the right tower.
Please leave over 300 mm between the two towers.
2 7
4 screws shall be tightened
*Note: The side of the series box with "R" shall be against the wall.
28
*Note: The cover that covers on the series box shall be installed after finishing wiring. As
for the installation procedure of the cover, please refer to the section of "Installation of
Cover".
M5 * 14
2.2-2.5 N·m
125