SOLAX X3-IES-4K Manual De Instalación página 153

4. Meter/CT cable connection steps
Crimping tool
for RJ45
Crimp terminal B and A as the CT pin definition if a CT is to be connected. Strip the cable but not crimp
1
terminal B and crimp terminal A as the meter definition if a meter is to be connected.
Remove the
dustproof cover
from the inverter
2
CT connection
Connect terminal B to the CT is a CT is to be connected.
4
Connect the two wires without terminal B to the pin 24 and 25 of the meter. Please refer to a meter manual for
a specific connection method.
B
B
Waterproof
distribution box
A
Connect terminal A
to the CT/Meter port
of the inverter.
3
Meter connection
B
A
Waterproof
distribution box
149