Publicidad
Idiomas disponibles
Idiomas disponibles
▪
Move around the tree in a clockwise direction. Approach grass/weeds with the tip of the
cutting blade.
▪
Kickback is a sudden reaction to a pinched or snagged rotating blade.
▪
Pinching or snagging causes rapid stalling or the rotating blade which in turn causes the
uncontrolled power tool to be forced in the direction opposite of the accessory's rotation at
the point of the binding.
▪
Kickback is a result of power tool misuse and/or incorrect operating procedures or
conditions and can be avoided by taking proper precautions.
▪
Maintain a firm grip on the machine and position your body and arm to allow you to resist
kickback forces.
▪
ALWAYS use both hands on the handle bar for maximum control over kickback or torque
reaction during start up.
▪
The operator can control torque reactions or kickback forces, if proper precautions are
taken.
▪
NEVER place your hand near the rotating blade. The blade may kickback over your hand.
▪
DO NOT position your body in the area where the power tool will move if kickback occurs.
Kickback will propel the tool in the direction opposite to the blades movement at the point
of snagging.
▪
Use special care when working in corners.
▪
Avoid bouncing and snagging the cutting head.
13 CLEANING AND MAINTENANCE
WARNING! Before cleaning, inspecting or repairing your unit, you MUST
make sure that the engine has stopped and allowed to cool. You MUST
disconnect the spark plug HT lead cap to prevent any accidental starting.
CAUTION! ALWAYS refuel in a well-ventilated area with the engine off and
the spark plug HT cap removed. Whilst carrying out maintenance you MUST
wear appropriate Personal Protective Equipment (PPE). Suggested PPE
Sturdy footwear, work gloves, long trousers and hearing protection.
NOTE: Spare parts – If a part needs replacement, you MUST only use parts
that meet the manufacturer's part number specifications. Replacement
parts that DO NOT meet specifications may result in a safety hazard or poor
operation of the machine and will VOID the warranty. Major servicing
including installation or replacement parts, should be made by a qualified
service technician.
Copyright © 2024 VARO
POWXG50200
P a g e
| 10
EN
www.varo.com
Publicidad
